An advanced professional grade formula, corrosion resistant, premium lightweight filler with outstanding adhesion to steel (including galvanized), aluminum, E-coat, SMC, fiberglass and sanded/cured primer and paint. This high build filler won’t sag even when a thick layer is needed. Fills more substantial surface imperfections. EZ sanding in 15 minutes. Won’t clog paper. Tack free/ stain free/ shrink free. Smooth and creamy consistency, EZ sanding, pinhole-free finish. Good resistance to pinholes. 0.8 U.S. Gallon (3L). Includes one TSBH 2.75 fl. oz. hardener. Tech Tips  The correct mix ratio for body filler is 98% filler and 2% hardener (50 parts filler to 1 part hardener). Body level does not level and flow as much as glaze when it is dispensed onto a mixing pallet. To achieve a 2% hardener ratio, run a straight, uniform bead of hardener across the diameter of the portion of the filler. Remember to thoroughly knead the tube of hardener before dispensing.  Do not alter hardener ratio to compensate for temperature conditions. Under-hardening results in the filler never achieving the full physical properties. This results in poor adhesion, strength and durability. Over-hardening may result in residual hardener on the sanded surface, which could react with primers and top coats.  When mixing filler, fold the hardener into the product with a plastic spreader (do not stir). Apply pressure with the spreader during the mixing and application to minimize air entrapment. Correct Hardener Ratio for Glaze
