Product Description
Features:
• Bright Colours
• Lead-Free
• Fade Resistance
• Air-Drying
Weight: 340g/ 12 ounce
| Specifications: | |
| Package | Aerosol Spray Can |
| Product Type | J2 E Series |
| Temperature Class | - |
| Preferred Application Method | Spray |
| Curing Type | Room Cure |
| Application Type | Air-Drying |
| Dry Time | Set to Touch:5-9 minutes/Tack Free: 20-30 minutes |
Applications:
Used ina wide rang of applications on wood, metal and fibreglass
An alkyd based paint whose vehicle is composed of sort-oil Block polymers. The bright, lead-free colours are fade resistant and have heat resistance of up to 176 C (350 F). This air-dry thermosetting enamel can be used for a wide range of applications on wood, metal and fibreglass.
Click for SDS
Special Instructions Apply only to a clean, dry surface free from grease, wax, rust, etc. On previously painted surfaces, test spray in a small, inconspicuous area. Hold can 8" to 12" from surface. Spray in short, overlapping strokes to obtain even coverage. Do not use a continuous spray. It is better to apply two light coats than one heavy coat. Spray second coat within ½ hour or wait 48 hours for the paint to fully cure. If you miss the ½ hour “window”, the second coat may cause the paint to react and leave the paint with an “orange peel” effect. Dry Time (under normal conditions) Set to Touch 5-9 minutes Tack Free 20-30 minutes Hard Dry 15-24 hours Full Cure Time 48 hours
Minimum Purchase Quantity - 06
